CONC SCREW S-CSA 6x100 ZP COUNT TX30 5pc

Sormat S-CSA CS concrete screw with countersunk head and Torx drive, manufactured in Finland. The carbon steel screw is cold-formed and provides a reliable fastener strong enough to penetrate even hard materials. The concrete screw features a hardened special thread that forms threads into the base material. Surface treatment: electro-galvanizing (? 5 µm) in accordance with EN ISO 4042. The screw is fully removable. Tensile strength of the screw: 800 MPa. Recommended environment: dry indoor conditions. The product has European Technical Approval ETA-16/0945 for concrete and ETA-17/1009 for multiple fastenings in concrete and pre-tensioned hollow core slabs. The product is also CE marked. Fire classification up to R120 in concrete installations. The concrete screw is designed for through-installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole thoroughly. 3. Insert the screw through the material to be fastened until the anchor base contacts the material. We recommend using a suitable-sized impact screwdriver for installing concrete screws. No pre-defined torque value. The design allows for small minimum edge and spacing distances between anchors. Packaging size: 5 pieces. Packaging type: small pack. The screw has a partial thread with thread length of 70 mm. Screw head: T30, head diameter 14 mm, head height 4.5 mm. Suitable base materials: concrete, hollow core slab, solid brick, and solid calcium sandstone. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 65 mm. Thickness of material to be fastened: 45/60 mm. This product description is an automated translation of the original Finnish description.