CONC SCREW S-CSA INNER SORMAT 6X35 M8/M10X30 SW13 ZP 50PCS

The Sormat S-CSA I concrete screw, manufactured in Finland, features a detachable M8/M10 internal thread.

The carbon steel screw is cold-formed to provide a reliable fastener strong enough to penetrate even hard materials. The concrete screw has a hardened special thread that forms threads into the base material.

The surface treatment is electroplated zinc coating (? 5 µm) in accordance with EN ISO 4042. The screw is fully removable. The tensile strength of the screw is 800 MPa. Recommended operating environment: dry indoor conditions. The product has European Technical Approval ETA-17/1009 for anchoring into concrete and precast hollow core slabs. Based on this approval, the product is also CE marked. Fire rated for concrete installations up to R120. The concrete screw is designed for through-installation.

Installation steps:

• 1. Drill a hole according to the product specifications.
• 2. Clean the hole thoroughly.
• 3. Install the screw through the material to be fastened until the anchor flange contacts the material to be fastened. The anchor can also be installed directly into the substrate without the fastened component. We recommend using a suitable size impact screwdriver for installing concrete screws. No preset torque value is required.

Usage allows for small minimum spacing between anchors and to edges. Pack size: 50 pcs. The concrete screw has a partial thread with a thread length of 30 mm. Flange diameter: 14 mm, flange height: 1.7 mm. Internal thread M8/M10 wrench size AV13, internal thread M8 length: 7 mm, internal thread M10 length: 9 mm.

Applicable substrates: concrete, hollow core slab, solid brick, and solid calcium sand brick. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 45 mm. Thickness of material to be fastened: 1 mm.

This product description is an automated translation of the original Finnish description.