CONC SCREW SORMAT S-CSA CS 6X120/65/80 ZINC PLATED 50PCS

Sormat S-CSA CS concrete screw with a countersunk head and Torx drive, manufactured in Finland. The carbon steel screw is cold-formed to provide a reliable fastener strong enough to penetrate even hard materials. The concrete screw features a hardened special thread that forms its own thread in the base material. Surface treatment: electroplated zinc coating (? 5 µm) in accordance with EN ISO 4042. The screw is fully removable. Tensile strength of the screw is 800 MPa. Recommended environment: dry indoor conditions. The product has European Technical Approval ETA-16/0945 for concrete and ETA-17/1009 for series fastenings into concrete and pre-tensioned hollow core slabs. The product is also CE marked. Fire rated for concrete installations up to R120. The concrete screw is designed for through-installations. Installation steps: 1. Drill a hole according to the product specifications. 2. Clean the hole thoroughly. 3. Insert the screw through the material to be fastened into the hole until the screw head contacts the surface of the material to be fastened. We recommend using a suitable size impact screwdriver for installing concrete screws. No pre-defined torque value is specified. The design allows for small minimum edge and spacing distances between anchors. Pack size: 50 pcs. The screw has a partial thread with a thread length of 70 mm. Screw head: T30, head diameter 14 mm, head height 4.5 mm. Suitable base materials: concrete, hollow core slab, solid brick, and solid calcium silicate brick. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 65 mm. Thickness of material to be fastened: 65/80 mm. This product description is an automated translation of the original Finnish description.