CONC SCREW SORMAT S-CSA PAN ZP 6X60/5/20 (FL) T30 ZP 50PCS

Sormat S-CSA P (FL) concrete screw manufactured in Finland with a flat countersunk head and Torx drive. The carbon steel screw is cold-formed to provide a reliable fastener that is sufficiently strong to penetrate even hard materials. The concrete screw features a hardened special thread that forms threads into the base material. Surface treatment: electroplated zinc coating (? 5 µm) in accordance with EN ISO 4042. The screw is fully removable. Tensile strength of the screw is 800 MPa. Recommended environment: dry indoor conditions. The product has European Technical Approval ETA-16/0945 for concrete and ETA-17/1009 for series fastenings into concrete and precast hollow core slabs. The product is also CE marked. Fire rated for concrete installations up to R120. The concrete screw is intended for through-installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole thoroughly. 3. Insert the screw through the material to be fastened until the anchor base contacts the material. We recommend using a suitable size impact screwdriver for installing concrete screws. No pre-defined torque value. Installation allows for small minimum edge and spacing distances between anchors. Package size: 50 pcs. The screw has partial thread with a thread length of 55 mm. Screw head T30, head diameter 17.4 mm, head height 3.5 mm. Suitable base materials: concrete, hollow core slab, solid brick, and solid calcareous sandstone. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 65 mm. Thickness of material to be fastened: 5/20 mm. This product description is an automated translation of the original Finnish description.