ANCHOR SORMAT S-KAK 20X170/20 HDG 1PCS

Sormat S-KAK hot-dip galvanized wedge anchor manufactured in Finland. High-quality Finnish moment-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body made from automatic steel is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: hot-dip galvanizing (>50 µm) according to EN ISO 10684. Recommended for use in dry and humid indoor environments and also for outdoor applications. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and maximum fastening thickness are marked on the anchor body. Packaging size: 1 piece. Packaging type: small pack. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length: 55 mm. Spanner size AV30. Suitable substrates: concrete and natural stone. Suitable for fastening into non-cracked concrete. Drill hole diameter: 20 mm. Drill hole depth: 135 mm. Fastened material thickness: 20 mm. This product description is an automated translation of the original Finnish description.