ANCHOR SORMAT S-KA 20X170/20 ZP

Finnish-made Sormat S-KA electrically galvanized wedge anchor. High-quality domestic moment-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body, manufactured from automatic steel, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: electrical galvanizing (? 5 µm) according to EN ISO 4042, followed by passivation in accordance with Cr3+. Recommended operating environment: dry indoor areas. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a metal brush and air pump. Cleaning: brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. Packaging size: 1 piece. Packaging type: small pack. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length: 55 mm. Spanner size AV30. Suitable substrates: concrete and natural stone. Suitable for fastening into non-cracked concrete. Drill hole diameter: 20 mm. Drill hole depth: 135 mm. Thickness of material to be fastened: 20 mm. This product description is an automated translation of the original Finnish description.