Roll over image to zoom in
ANCHOR SORMAT S-KAH+ 10X72/10/- A4 40PCS
High-quality Finnish-made updated Sormat S-KAH+ A4 acid-resistant M10 wedge anchor. Premium domestic torque-controlled wedge anchors are suitable for pre-installation, through-installation, and distance installation. The anchor body, manufactured from cold-worked A4 steel (1.4578), is durable and safe, effectively withstanding loads applied to the fastening. Recommended for indoor, outdoor, and industrial use.
The product has European Technical Approval ETA-16/0934 for fastenings in concrete (Option 1). The product is also CE marked. The product is fire rated up to R120 in concrete installations.
Installation Steps1. Drill a hole according to the product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically with an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. As the anchor is tightened, its wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and thickness of the attached component are marked on the anchor body. A length marking indicator C is located at the end of the anchor body.
Features- Pack size: 40 pieces
- Wedge anchor type designation: nominal diameter x length / fastening thickness
- Thread length: 27 mm
- Span wrench size AV17
- Compatible substrates: concrete and natural stone
- Suitable for fastenings in both cracked and uncracked concrete
- Drill hole diameter: 10 mm
- Drill hole depth: 55 mm
- Fastened material thickness: 10 mm