CHEMICAL RESIN SORMAT ITH 300 Ve (300 ML)

Highly efficient vinyl ester-based anchoring mortar for fixings, including concrete and stone. Also suitable for rebar installations. Content 300 ml. Highly efficient Sormat ITH 300 Ve styrene-free vinyl ester-based anchoring mortar. A fast-curing two-component mortar used for anchoring rods, bolts, and rebar into pre-drilled holes. Installation with a standard mortar gun. Suitable substrates: concrete, natural stone, solid brick, lightweight concrete block, lightweight aggregate block, solid calcareous sand brick. Suitable for fixings in both cracked (M12-M30) and uncracked concrete. The mortar can also be used together with the plastic hollow casing IOV for anchoring in hollow structures such as perforated brick and hollow slab. Installation steps:

• 1. Drill a hole according to the product information.
• 2. Clean the hole thoroughly with a brush and air pump.
• 3. Open the cap and cut open the bag's nozzle.
• 4. Screw the included ISL mixing nozzle into place.
• 5. Perform a test extrusion by extruding at least 10 cm of mortar with the gun until the two different-colored components are thoroughly mixed.
• 6. Fill 2/3 of the hole in solid material, and completely fill the hollow casing with mortar in hollow material.
• 7. Screw the metal anchor into the hole and observe the specified working and curing times.
• 8. Place the fixture in position and tighten to the correct torque. Consider working and curing times, as indicated on the packaging, during planning.

Suitable application temperature: +5 °C to +40 °C. Storage: Store at +5 °C to +25 °C in a cool, shaded place, upright position. The product has a limited shelf life; the best-before date (month and year) is marked on the product. Always verify that the product is still usable before installation. The product can also be used for overhead fixings and in damp or water-filled drill holes. The product has drinking water approval, meaning it is certified for use in applications involving drinking water (NSF-61). The mortar exhibits excellent resistance to chemicals, heat, and cold, and has low VOC content (A+). The product has European Technical Approval ETA-13/0774 for concrete (including use under seismic loads (C1)) and ETA-13/0775 for post-installed rebar fixings in concrete. It also has approval ETA-17/0422 for masonry structures. The product is CE marked. Fire classification up to R120 for concrete installations. Empty packaging or hardened mortar can be disposed of as combustible waste. Packaging size: 300 ml. Includes 2 ISL mixing nozzles. Additional mixing nozzles are available separately. This product description is an automated translation of the original Finnish description.