ANCHOR SORMAT S-KA+ 8X57/5/- ZINC PLATED 3PCS

High-quality Finnish-made Sormat S-KA+ electroplated M8 wedge anchor. Premium domestic torque-controlled wedge anchors are suitable for pre-installation, through-installation, and distance installation. The anchor body, manufactured from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: electroplating (? 5 µm) according to EN ISO 4042, followed by Cr3+ compliant passivation. Recommended operating environment: dry indoor areas. The product has European Technical Approval ETA-16/0934 for fastenings in concrete (Option 1). The product is also CE marked. The product is fire rated up to R120 in concrete installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and thickness of the attached component are marked on the anchor body. The anchor body has a length marking identifier B. Pack size: 3 pieces. Packaging type: small pack. Wedge anchor type designation: nominal anchor diameter x length / fastening thickness. Thread length: 17 mm. Spanner size AV13. Suitable substrates: concrete and natural stone. Suitable for fastenings in both cracked and uncracked concrete. Drill hole diameter: 8 mm. Drill hole depth: 47 mm. Thickness of attached material: 5 mm. This product description is an automated translation of the original Finnish description.