ANCHOR SORMAT S-KAH+ 8X57/5/- A4 50PCS

High-quality Finnish-made Sormat S-KAH+ A4 acid-resistant M8 wedge anchor. Premium domestic torque-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body, manufactured from cold-worked A4 steel (1.4578), is durable and safe, effectively withstanding loads applied to the fastening. Recommended for indoor, outdoor, and industrial use. The product has European Technical Approval ETA-16/0934 for fastenings in concrete (Option 1). The product is also CE marked. The product is classified as fire-resistant up to R120 in concrete installations. Installation Steps

1. Drill a hole according to the product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. As the anchor is tightened, its wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and thickness of the attached component are marked on the anchor body. The anchor body has a length marking indicator B at its end.

Features

• Pack size: 50 pieces
• Wedge anchor type designation: nominal diameter x length / fastening thickness
• Thread length: 17 mm
• Span wrench size: AV13
• Compatible substrates: concrete and natural stone
• Suitable for fastenings in both cracked and uncracked concrete
• Drill hole diameter: 8 mm
• Drill hole depth: 47 mm
• Fastened material thickness: 5 mm

This product description is an automated translation of the original Finnish description.