THROUGH BOLT SORMAT S-KAK 6/15x65 100pcs

Sormat S-KAK hot-dip galvanized wedge anchor manufactured in Finland. High-quality Finnish moment-controlled wedge anchors are suitable for pre-installation, through-installation, and distance installation. The anchor body, made from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: hot-dip galvanizing (? 20 µm) according to EN ISO 10684. Recommended for use in dry and humid indoor environments as well as outdoor applications. The product has European Technical Approval ETA-18/0971 for anchoring into concrete. The product is also CE marked. The product is classified for fire resistance up to R120 in concrete installations. Installation steps: 1. Drill a hole according to the product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and maximum fastening thickness are marked on the anchor body. Packaging size: 100 pcs. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length: 38 mm. Spanner size AV10. Suitable substrates: concrete, solid brick, and natural stone. Suitable for anchoring into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 45 mm. Fastening material thickness: 15 mm. This product description is an automated translation of the original Finnish description.