ANCHOR SORMAT S-KAK 6X40/2 HDG 150PCS

Sormat S-KAK hot-dip galvanized wedge anchor manufactured in Finland. High-quality Finnish moment-controlled wedge anchors are suitable for pre-installation, through-installation, and distance installation. The anchor body, made from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: hot-dip galvanizing (? 20 µm) according to EN ISO 10684. Recommended for use in dry and humid indoor environments and also for outdoor applications. The product has European Technical Approval ETA-18/0971 for anchoring into concrete. The product is also CE marked. The product is classified for fire resistance up to R120 in concrete installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. Packaging size: 150 pcs. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length 18 mm. Spanner size AV10. Suitable substrates: concrete, solid brick, and natural stone. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter 6 mm. Drill hole depth 35 mm. Thickness of material to be fastened 2 mm. This product description is an automated translation of the original Finnish description.