THROUGH BOLT S-KA 6/15x65 ZP 4pcs

Finnish-made Sormat S-KA electroplated wedge anchor. High-quality domestic moment-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body, manufactured from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: electroplating (? 5 µm) according to EN ISO 4042, followed by passivation in accordance with Cr3+. Recommended operating environment: dry indoor areas. The product has European Technical Approval ETA-18/0971 for anchoring into concrete. The product is also CE marked. The product is fire rated up to R120 in concrete installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically with an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and maximum fastening thickness are marked on the anchor body. Packaging size: 4 pcs. Packaging type: small pack. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length: 38 mm. Spanner size AV10. Suitable substrates: concrete, solid brick, and natural stone. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 45 mm. Fastening material thickness: 15 mm. This product description is an automated translation of the original Finnish description.