THROUGH BOLT SORMAT S-KA 6X40 ZP 150PCS

Finnish-made Sormat S-KA electroplated wedge anchor. High-quality domestic moment-controlled wedge anchors are suitable for pre-installation, through-installation, and distance installation. The anchor body, manufactured from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment: electroplating (? 5 µm) in accordance with EN ISO 4042, followed by passive treatment in compliance with Cr3+. Recommended operating environment: dry indoor conditions. The product has European Technical Approval ETA-18/0971 for anchoring into concrete. The product is also CE marked. The product is classified as fire resistant up to R120 in concrete installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Cleaning: brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. Packaging size: 150 pcs. Wedge anchor type designation: nominal diameter x length / maximum fastening thickness. Thread length: 18 mm. Spanner size AV10. Suitable substrates: concrete, solid brick, and natural stone. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 35 mm. Thickness of material to be fastened: 2 mm. This product description is an automated translation of the original Finnish description.