ANTENNA CABLE ECOFLEX 10 HEATEX 50ohmCca505m

Ecoflex 10 Plus Heatex is a halogen-free 50 ohm cable and is well suited for 3/4/5G and WiFi signals.

The central conductor of the Ecoflex 10 Plus Heatex cable consists of an aluminum core with a copper coating. This reduces weight and improves performance, especially at high frequencies. At the same time, the cable is fire-safe, produces minimal smoke, and is halogen-free.

Heatex cables are used in situations where it is important that cables do not ignite easily during a fire and thus do not act as fire spreaders, as traditional PVC cables can. PVC cables are also fire-safe in that they do not act as ignition sources, but an existing fire can ignite them, and then PVC cables can act as fire spreaders. Heatex cables, on the other hand, ignite very poorly and self-extinguish.

Heatex cables are halogen-free and emit very little smoke, which could obstruct visibility and escape from a burning building. Heatex cables also do not release corrosive compounds during fires, unlike PVC cables.

Heatex cables are used, among other applications, in WLAN networks, base station and radio amateur antennas, remote control systems for water and similar facilities, and other professional applications requiring high-quality 50 ohm coaxial cable. Due to their fire safety, Heatex cables are the best choice especially for public spaces, ships, and hazardous environments.

NOTE. Heatex cable is not intended for TV or satellite antennas, which use 75 ohm cable.

Electrically and in all other properties, Ecoflex 10 Plus and 10 Plus Heatex cables are identical. The only difference is in the outer insulation layer.

Ecoflex 10 Plus Heatex coaxial cable

• Developed from Heatex 10 standard and Ecoflex 10 Plus, low losses even up to 8 GHz frequencies.
• Impedance 50 ohm
• Outer diameter of coaxial cable 10.2 mm
• Outer insulation black, non-flammable HEATEX
• Braided copper shield, 75% coverage
• PE-coated copper foil, 100% coverage
• Inner insulation PE foam with coating 7.2 mm
• Central conductor 7 x 1.0 mm (diam. 2.85 mm), hybrid, twisted aluminum with copper coating
• Velocity factor 0.85
• Capacitance 78 pF / meter
• Minimum bending radius, one-time 40 mm, repeated 80 mm
• Weight 10.6 kg / 100m
• Temperature range: Transport and fixed installation -55 ... +85°, Flexible use -40 ... +85°
• CPR classification: Cca, s1, d0, a1

This product description is an automated translation of the original Finnish description.