WELDING SHIELD SUNDSTRÖM SR 574/570

Welding mask/face shield, EN 4/9-13 SR 574 welding mask is intended for use together with the Sundström SR 570 face shield. The face shield equipped with a welding mask, together with a battery-powered SR 500 or SR 700 blower and approved filters, are included in Sundström's powered air-purifying respirator systems. The breathing hose of the face shield is connected to the blower equipped with filters. The positive pressure in the face shield prevents particles and other contaminants from entering the breathing zone. The products can also be used with the SR 507 compressed air add-on unit. The combination forms a breathing apparatus designed to be connected to compressed air for a continuous air supply. See the separate SR 507 product brochure. The combinations are designed to protect against harmful gases/particles, radiation, and splashes during welding, flame cutting, grinding, and other similar tasks. Suitable for work in confined and hard-to-reach areas. The equipment can be used as an alternative to respirators in all conditions where respirator use is recommended. This applies particularly to heavy, long-duration, or hot-condition work. Before use, a welding lens with an appropriate shade number must be attached to the welding mask. The SR 574 is supplied with an automatic welding lens EN 4/9-13 and a polycarbonate protective lens. The lens must bear the CE marking and must be of standard size 90 x 110 mm. Accessories are available, such as welding lenses, automatic welding lenses, corrective lenses, neck and chest protectors, and hose protectors. This product description is an automated translation of the original Finnish description.