WELDING VISOR SUNDSTRÖM SR 584/580

Welding Visor/Visored Helmet The SR 584 welding helmet is intended for use together with the visor-equipped SR 580 helmet. The complete helmet with welding face shield, when combined with the battery-powered SR 500 or SR 700 blower and approved filters, is included in Sundström's powered air-purifying respirator systems. The breathing hose of the visored helmet must be connected to a filter-equipped blower. The positive pressure created in the helmet visor prevents particles and other contaminants from entering the breathing zone. The products can also be used together with the SR 507 compressed air add-on unit. The combination forms a respirator designed to be connected to a compressed air unit as a continuous-flow breathing apparatus. See the separate SR 507 product brochure. The combinations are designed to protect against harmful gases, radiation, and splashes during welding, flame cutting, grinding, and similar tasks. The design makes it suitable for working in confined and hard-to-reach areas. The device can be used as an alternative to filter-equipped respirators in all applications where they are recommended. This applies especially to heavy, hot, or long-duration tasks. Before use, a welding lens with the appropriate shade number must be attached to the welding helmet. The SR 584 is supplied with a shade number 10 welding lens and a polycarbonate protective lens. The lens must bear the CE marking and must be of standard size 90 x 110 mm. Accessories such as automatic welding lenses, replacement lenses, neck and chest protectors, and hose protectors are available. This product description is an automated translation of the original Finnish description.