SOFTWARE TST6754 IC INTERFACE

INTELLIGENT CONTROLLER – SMART LIGHTING CONTROL The Teknoware Intelligent Controller (IC) system allows for the control of time-operated emergency lights using freely selectable voltage inputs. When voltage disappears from one or multiple group centers, the designated emergency lights turn on with AC voltage. Emergency lights can also be used as general lighting, controlled by switches or sensors. The IC Input module includes: ·8 voltage inputs, each with its own galvanically isolated L and N connection·An address set via DIP switch·The IC system consists of the following components:·Addressable Tapsa Control emergency lighting centers of model TKT65C, TKT66C, TKT67C, or TKT68C, addressable K-model emergency lights·TST8801, IC Input module (Max 31 units in one IC system)·TST6x5x, emergency lighting center lighting control interface (includes PC software)Easy to program and install System settings are programmed using PC software during commissioning. Programming is stored in the emergency lighting center's memory, and the PC is only required during programming. Each input of the IC Input module can be configured to control any light or group of lights in desired groups. Logical switches can also be programmed into the system, where inputs from the IC Input module are grouped to turn lights on and off. Individual inputs and logical switches can also be used in inverted mode, so that the light turns off when voltage is applied to the input. This product description is an automated translation of the original Finnish description.