ALUMINUM SCAFFOLD JUMBO 178 BODY 0,74X1,8+PLATFORM 0,6X1,8

Tikli Jumbo 178 is a user-friendly professional access scaffold. It consists of two parts: a hinged aluminum frame with lockable 12.5 cm wheels and a work platform (0.6 x 1.8 m). The 50 mm aluminum tube profile with a wall thickness of 2 mm makes the scaffold sturdy and durable. Lockable fixed wheels (4 pcs) keep the scaffold firmly in place, and it is very easy and lightweight to move. The work platform height can be easily adjusted to seven different levels according to end frames. The base unit has a maximum platform height of 1.8 m, maximum working height of 3.8 m, width of 1.85 m, and depth of 0.74 m. Transport dimensions are 1.80 x 0.30 x 0.90 m, weight 32 kg. Complies with VNa 205/2009 regulation, EN1004 scaffold class 3, maximum load capacity 200 kg/m². According to VNa 205/2009 stability requirements, for construction site use, additional accessories are required: four 0.5 m support legs (product number 500891929) for platform heights 1–2.5 m and a lockable access ladder for climbing (product number 500891838). Guardrail requirements start at a platform height of 2 meters, or even lower depending on site conditions; we recommend installing guardrails on the base unit. A 1-meter guardrail set is available as an accessory. Also consider the fully elevated sets from the same series: 178L+1+1, 178L+2+1, or 178x2, where two scaffolds are stacked. Tip: If you wish to later extend the base unit, you can purchase the Tikli Jumbo 178 Raksaset (base unit with hatch, support legs, and access ladder) and the SARJA+ connection set. Alternatively, extension can be achieved using end elements: guardrail set, access ladder, kick plate set, and 1-meter or 2-meter extension sets, along with longer support legs and other accessories. The scaffold has been tested according to EN1004 standard, scaffold class 3: maximum load capacity 200 kg/m². According to VNa 205/2009 regulation, use a safe access solution to the work platform on construction sites: a lockable access ladder from either end of the scaffold using a horizontal ladder or from inside via a service hatch. For extended scaffolds, according to stability requirements, 2-meter support legs are needed for platform heights of 3.5–6 m, and 3-meter support legs are required from platform height of 6 m onwards. This high-quality scaffold series is suitable for professional use. This scaffold series can easily be adapted into a staircase solution using additional accessories (adjustable legs and end elements). Also inquire about expandability for indoor ceiling work by adding more work platforms. This product description is an automated translation of the original Finnish description.