FOLDING SCAFFOLD TIKLI JUMBO 178RAKSASETTI TIKLI JUMBO

Tikli Jumbo 178 Raksasetti is a user-friendly professional scaffold set. The set includes the Tikli Jumbo 178 base frame with a foldable aluminum frame equipped with lockable 12.5 cm wheels, a panelled work platform (0.6 x 1.8 m), and additionally four 0.5 m support legs as required by the VNa 205/2009 regulation for construction site use, providing stable platform heights from 1 to 2.5 m, along with a horizontal brace and a lockable access ladder (1 piece) to ensure safe access to the platform. The 50 mm aluminum tube profile with a wall thickness of 2 mm makes the frame robust and durable. Lockable fixed wheels (4 pieces) keep the scaffold firmly in place, and the scaffold is very easy and lightweight to move. The work platform height can be easily adjusted to seven different levels according to the end rails. The maximum platform height of the base unit is 1.8 m, the maximum working height is 3.8 m, the width is 1.85 m, and the depth is 0.74 m. The transport dimensions of the scaffold set are 1.80 x 0.30 x 0.90 m, and the weight is 42 kg. Guardrail requirements typically begin at a platform height of 2 meters, but we recommend installing guardrails even at lower heights. A 1 m guardrail set is available as an optional accessory. Also consider the fully elevated sets from the same series: 178L+1+1, 178L+2+1, or 178x2, which feature two scaffold frames stacked on top of each other. Tip: If you wish to later extend the Raksasetti, you can purchase an additional Tikli Jumbo 178 base frame and the SARJA+ connecting set (maximum platform height 2.5 m). Alternatively, use end elements such as guardrail sets and 1 m or 2 m extension sets, along with longer support legs and additional accessories. The scaffold set has been tested according to the EN1004 standard, scaffold class 3: maximum load capacity 200 kg/m². According to the VNa 205/2009 regulation, use a safe access solution to reach the platform on a construction site: a lockable access ladder either from the end of the scaffold via a horizontal brace or from inside the scaffold through a service hatch. For elevated scaffolds, 2 m support legs are required for platform heights of 2.5–6 m, and 3 m support legs are suitable for platform heights of 6–8.5 m. This high-quality scaffold set is suitable for professional use. Tip: This scaffold set can easily be adapted into a staircase solution using optional accessories (adjustable legs and end elements); inquire also about expandability for indoor ceiling work by adding additional work platforms. This product description is an automated translation of the original Finnish description.