HORISONTAL SUPPORT 2X120CM AT7-11ASK

Additional stability and safety for step ladders using horizontal supports. Horizontal supports prevent the ladder from tipping. Horizontal supports of 2 x 1.20 m are suitable for all Tikli professional step ladders (3–11 steps), i.e., models AT3–ATJ11 and Rankka series ladders. With horizontal supports, step ladders meet the stability requirements of the VNa 205/2009 regulation for construction site use. In shorter ladders, the stability requirement is already fulfilled with shorter horizontal supports, making the ladder easier to move. Horizontal support legs are available in various lengths. Horizontal supports of 0.9 m x 2 pcs fulfill the stability requirements for a 6-step AT6 professional step ladder or ATJ6 work platform for construction site use as well as RT's Safe Step Ladders guidelines. The ATJ8 professional step ladder comes pre-equipped with a 1.2 m horizontal support leg set and has been tested in accordance with standards SFS EN131-1:2015, SFS EN131-2:2010 + A2:2017 PRO and the VNa 205/2009 regulation for professional and construction site use. According to the standard, the maximum load is 150 kg. Step ladders with standing platform heights exceeding 2 m must not be used on construction sites according to the VNa 205/2009 regulation, e.g., ATJ10 / ATJ11. Horizontal supports of 1.2 m are also included with these ladders. This product description is an automated translation of the original Finnish description.