Roll over image to zoom in
LABELING PLATE 01-150-200x200JVT
A dark-emitting plastic sheet with a glow duration of approximately 15 hours. The photoluminescent plastic sheet meets the requirements of the DIN 67510 standard: the luminance of the sheet is 190 mcd/m² (after 5 minutes) and 11 mcd/m² (after 60 minutes); for comparison, 0.3 mcd/m² is about 100 times the threshold the human eye can distinguish in darkness.
The image is printed onto the surface of the sheet using a UV flatbed printer. The photoluminescent effect works only on the unprinted areas of the sign. The photoluminescent plastic sheet is suitable for both indoor and outdoor use. The sheet withstands cold and heat well (maximum -30°C / +50°C). The back of the sign is pre-coated with adhesive, making installation easier, and the adhesive sticker alone may be sufficient for some applications. The adhesive is a very strong "bear sticker."
Photoluminescent signs with adhesive backs can be attached to almost any surface using the sign's own adhesive. The sign complies with regulatory requirements and uses the ISO7010 pictogram.
This product description is an automated translation of the original Finnish description.