LABELING PLATE 01-201-200x200JVT

Glow-in-the-dark plastic sheet with a afterglow duration of approximately 15 hours. The photoluminescent plastic sheet meets the requirements of the DIN 67510 standard: the sheet's luminance is 190 mcd/m² (after 5 minutes) and 11 mcd/m² (after 60 minutes); for comparison, 0.3 mcd/m² is about 100 times the threshold the human eye can distinguish in darkness. The image is printed onto the sheet's surface using a UV flatbed printer. The photoluminescent effect works only in the non-printed areas of the sign. The photoluminescent plastic sheet is suitable for both indoor and outdoor use. The sheet withstands cold and heat well (maximum -30°C / +50°C). The sign's back surface is coated with adhesive, making installation easier, and the adhesive backing alone may suffice for some applications. The adhesive is a highly strong "bear adhesive." Photoluminescent signs with adhesive backing can be attached to almost any surface using the sign's own adhesive. The sign complies with regulatory requirements and uses the ISO7010 pictogram. This product description is an automated translation of the original Finnish description.