Roll over image to zoom in
LABELING PLATE KP01-150
A glow-in-the-dark plastic sheet with an afterglow time of approximately 15 hours. The photoluminescent plastic sheet meets the requirements of the DIN 67510 standard: the luminance of the sheet is 190 mcd/m² (after 5 minutes) and 11 mcd/m² (after 60 minutes); for comparison, 0.3 mcd/m² is about 100 times the threshold the human eye can distinguish in darkness.
The image is printed onto the surface of the sheet using a UV flatbed printer. The photoluminescent effect works only on the unprinted areas of the plate. The photoluminescent plastic sheet is suitable for both indoor and outdoor use. The sheet withstands cold and heat well (maximum -30°C / +50°C).
The sign complies with regulatory requirements and uses the ISO7010 pictogram. Installation can be done using the adhesive pads provided with the sign or with screws. Corner holes are pre-drilled in the sign.
This product description is an automated translation of the original Finnish description.