Roll over image to zoom in
OUTLET UNIT UNIDRAIN 1424 75mm VERTICAL WITH TRAP
Unidrain is a narrow and stylish linear floor drain that allows the floor slope to be directed in one direction and can be used with any size of floor tiles. Thanks to the patented steel frame structure, the drain can be securely and moisture-proof attached to the wall. The strong steel protects the junction between the floor and wall from leaks. Waterproofing is achieved using a flexible waterproofing membrane at the junction between the steel frame and the wall/floor surface.
The drain assembly consists of four parts: the floor drain body, the waste pipe, the frame, and the grating/panel. The first two parts are required before pouring the floor, and the last two after waterproofing.
The drain is extremely easy to clean thanks to the handle and removable water trap.
The vertical drain 2412 compatible with the linear floor drain is compatible with fixtures 1001-02-03-04, 1100, 3002, 3004, and 5002-03.
The drain outlet diameter is 75 mm, and the product also includes two side connections with a diameter of 40 mm. The side connections can be opened as needed. A reducer with a diameter of 40/32 mm is included. Capacity: 1.85 l/s.
Push the water trap down into the drain until the openings of the side connections are visible. It can be rotated 180 degrees if the outlet pipe needs to be directed backward.
Features- Ř 75 vertical drain with side connections
- includes a water trap that can be disassembled and cleaned
- flow capacity: 1.85 l/s
- outlet pipe diameter: 75 mm
- side connections: 2 x 40 mm
- grate material: plastic
- model/type: rectangular
- The water trap must be pushed down in the drain below the openings of the side connections.
- The side connections have a diameter of Ř 40 mm, and a reducer Ř 32 mm is included with the drain.