Roll over image to zoom in
THERMOSTAT UPONOR T-143 BUS SMATRIX PUBLIC SPACE
Uponor Smatrix Base T-143 is a wired room thermostat for public spaces within the Uponor Smatrix Base heating control system. Temperature adjustments are located behind the thermostat. The thermostat features an override alarm, heating/cooling mode switch, selection of operating modes via DIP switches, and can be connected to an external sensor. The thermostat is connected via a 4-pole interference-protected cable (Jamak 2x(2+1)x0.5). The thermostat is glossy white in color RAL9016.
Dimensions- width: 80 mm
- height: 80 mm
- depth: 26.5 mm
Smatrix Pulse is an Uponor-developed control system for managing floor heating and floor cooling. With the floor heating control system, the indoor temperature can be regulated room by room. The system is energy-efficient, consuming less energy without compromising comfort. The heating control system includes automatic balancing, eliminating the need for traditional circuit-by-circuit balancing. Floor heating and cooling provide an efficient solution for apartment climate control, as they evenly distribute the desired temperature throughout the entire room. The control range of the heating control system is +5 °C to +35 °C.
The Uponor Smatrix Pulse control system can be configured as a complete solution tailored to your needs, ranging from a simple basic system to a smart system enabling features such as voice control and remote operation. The Uponor Smatrix Pulse system consists of a central unit and, if needed, an additional central unit component, an optional web module, room thermostats, and actuators, all selected according to the project requirements. The system's core, the central unit, receives information on heating or cooling demand from the thermostats and controls the actuators accordingly. The web module allows convenient control and configuration of the system via the Uponor Smatrix Pulse app. Installation of the system is simple and straightforward.
Uponor Smatrix Base PulseSmatrix Base Pulse is the wired version of the Pulse control system. The wired central unit communicates using two-way bus technology. Wired Base room thermostats operate with a Modbus interface. Thermostats can be connected to the central unit in series, star, direct, or combined configurations.
The wired Smatrix Base Pulse system is suitable for controlling the following heating and cooling types:
- water-based floor heating
- electric floor heating
- floor cooling
- ceiling cooling (two- or four-pipe)
Explore other components of the Uponor Smatrix Pulse system and the full range of Uponor floor heating products at Onninen's online store and Express outlets!
This product description is an automated translation of the original Finnish description.