Roll over image to zoom in
CONTROL UNIT PROCONTROL 0-10V DC
Product code
7911470
The ProControl controller is suitable for controlling all voltage signal-controlled (0-10 VDC) ventilation units, exhaust hoods, and fans.
With the controller, you can select the ventilation power from three options: home, away, or scheduled boost. The display bars indicate the ventilation power at a glance.
Humidity control is the most important method of controlling residential ventilation systems. The optional ProControl humidity transmitter enhances ventilation, for example, after sauna or shower use, and returns ventilation to normal once the areas have dried.
Controller features
The display shows indoor and outdoor temperature, if available via Modbus bus.
All fan speeds can be pre-set during commissioning.
Possibility of automatic kitchen hood boost based on the KTXA hood position signal.
An LED light indicates the current ventilation speed. The LED can also receive fault signal information from the ventilation unit’s fault relay.
ProControl’s learning humidity control automatically adapts to humidity variations caused by seasonal changes. The humidity setpoint does not need to be manually configured; the ProControl controller sets the correct value based on collected historical data and updates it as needed. The boost duration and humidity deviation can be pre-selected during commissioning.
The ProControl controller can be connected to a Modbus bus. Through the Modbus bus, the ventilation unit’s fan speed can be controlled and the controller’s settings can be adjusted.
Through the bus, you can read:
the unit’s operating speed
the humidity value provided by the humidity transmitter
ventilation unit fault information, if the fault relay is connected to the ProControl controller.
The ProControl controller and humidity transmitter require a 24 VAC supply voltage.
Vallox MC ventilation units feature internal supply air temperature control with AUTO function (in winter: supply air temperature +17 °C, in summer: bypass of heat recovery), supply/exhaust air flow ratio control, summer/winter automation, fault relay, and maintenance reminder.
The ProControl controller can also be used alongside the Digit SED controller in SE models, where ProControl controls only the fan speed. The Digit SED controller can remain near the unit for setting other parameters. The ProControl controller’s voltage signal (0-10 VDC) for fan control is connected to the SE model’s remote monitoring connection (VAK). This product description is an automated translation of the original Finnish description.
With the controller, you can select the ventilation power from three options: home, away, or scheduled boost. The display bars indicate the ventilation power at a glance.
Humidity control is the most important method of controlling residential ventilation systems. The optional ProControl humidity transmitter enhances ventilation, for example, after sauna or shower use, and returns ventilation to normal once the areas have dried.
Controller features
The display shows indoor and outdoor temperature, if available via Modbus bus.
All fan speeds can be pre-set during commissioning.
Possibility of automatic kitchen hood boost based on the KTXA hood position signal.
An LED light indicates the current ventilation speed. The LED can also receive fault signal information from the ventilation unit’s fault relay.
ProControl’s learning humidity control automatically adapts to humidity variations caused by seasonal changes. The humidity setpoint does not need to be manually configured; the ProControl controller sets the correct value based on collected historical data and updates it as needed. The boost duration and humidity deviation can be pre-selected during commissioning.
The ProControl controller can be connected to a Modbus bus. Through the Modbus bus, the ventilation unit’s fan speed can be controlled and the controller’s settings can be adjusted.
Through the bus, you can read:
the unit’s operating speed
the humidity value provided by the humidity transmitter
ventilation unit fault information, if the fault relay is connected to the ProControl controller.
The ProControl controller and humidity transmitter require a 24 VAC supply voltage.
Vallox MC ventilation units feature internal supply air temperature control with AUTO function (in winter: supply air temperature +17 °C, in summer: bypass of heat recovery), supply/exhaust air flow ratio control, summer/winter automation, fault relay, and maintenance reminder.
The ProControl controller can also be used alongside the Digit SED controller in SE models, where ProControl controls only the fan speed. The Digit SED controller can remain near the unit for setting other parameters. The ProControl controller’s voltage signal (0-10 VDC) for fan control is connected to the SE model’s remote monitoring connection (VAK). This product description is an automated translation of the original Finnish description.
Product details
Technical specifications
Product class (ETIM)Speed controller (EC000256)
Mounting methodSurface mounted
ColourWhite
Number of phases1
Power control steplessno
Number of steps3
Basic element without coverno
Method of operationPush button/touch control button
LightingNone
With temperature sensorno
Degree of protection (IP)IP54
Product codes
SAPATB673
HPAC7911470
PLC7911470
GTIN/EAN6415879114705
Vendor material number7911470
Environment and safety
Sustainability categories
Circular economy
Features
Availability of spare parts after discontinuation (years)10