Roll over image to zoom in
HEAT RECOVERY UNIT VALLOX 125G CFi RA12
Product code
7912243
Suitable for direct connection to the exhaust outlets of Ilto 250, 270, 280, and 290 models with R-hand units. Note! Always check that the exhaust air duct has sufficient insulation when replacing the unit, as in older installations the exhaust air duct may be insufficiently or completely uninsulated. If insulation is difficult, construct a new exhaust air duct. Installation is facilitated by the Vallox Out/In Vario wall-mounted air supply and exhaust unit.
Features
- duct outlets 4 x 125 mm
- max. exhaust air 111 l/s @ 100 Pa
- max. supply air 107 l/s @ 100 Pa
- cross-flow counterflow heat exchanger, efficiency > 80 %
- specific energy consumption class (SEC) in cold/average climate: A+/A
- automatic partial heat recovery bypass with cool recovery
- Vallox demand-controlled defrost automation
- automatic boost with internal humidity and carbon dioxide sensor
- ability to remotely control via network by connecting the unit to MyVallox Cloud cloud service or MyVallox Home home network
- fire damper function
- supply air filtration ISO Coarse > 75 % + ISO ePM1
- exhaust air filtration ISO Coarse > 75 %
- electric afterheating resistor 900 W
- electric supplementary heating resistor 900 W
- Modbus and KNX interface ready
- safety switch cuts power when the door is opened
- Vallox Silent Klick water trap included in price
- control unit included in price
Product details
Technical specifications
Product class (ETIM)Heat recovery unit (residential) (EC011285)
Heat recovery byOther
Housing materialSteel
Material heat exchangerAluminium
Suitable for wall mountingyes
Suitable for ceiling mountingno
Suitable for floor mountingno
Left/right orientation reversibleno
Type of motorElectronically commutated (EC)
Voltage230 V
Frequency50 Hz
With thermal overload protectionyes
Electrical connectionConnecting cable with plug with protective contact
Energy efficiency class according to 1253/2014/EUA
With digital displayyes
With wired control unityes
Product codes
SAPDMA355
HPAC7912243
PLC7912243
GTIN/EAN6438326006453
Manufacturer part number4128136
Vendor material number7912243
Basic information
Package measurements (L x W x H)625 x 585 x 611 mm
Package volume223.397 l
Package weight69 kg
Base uniteach
Package units1 / 6
Package contents–
UNSPSC40161505
BrandVALLOX
VendorVALLOX OY
The country of origin stated by the supplierFinland
Environment and safety
Carbon footprint data
Carbon footprint of product manufacturing (A1–A3 GWP value)289.8
GWP, uniteach
Source for GWP dataco2data.fi
Emissions database (co2data.fi) ID7000000426