CIRCULATION PUMP WILO STRATOS PICO-Z 20/0,5-6-150

Product code
4624090
Wet rotor circulator pump for warm domestic hot water with threaded connections, jam-protected EC motor, and integrated electronic power control. Operating modes:
  • p-c constant pressure differential
  • temperature-controlled operating mode
Manual control functions:
  • select operating mode
  • adjust pump power (head)
  • set minimum temperature
  • set minimum flow rate
  • reset function to zero the flow meter
  • reset function to restore factory settings
  • "Hold" function (key lock) to lock settings
Automatic functions:
  • continuous power adaptation depending on operating mode
  • temperature control to maintain a constant return temperature in the domestic hot water circulation system
  • thermal disinfection procedure (detection and support for thermal disinfection of the domestic hot water storage tank)
  • automatic self-cleaning function
Indication and display functions:
  • display of current power consumption in W
  • display of cumulative energy consumption in kWh
  • display of current flow rate in m³/h
  • display of current temperature in °C
  • display of fault notifications (error codes)
Equipment:
  • protrusion on pump housing for spanner
  • electrical quick connector with Wilo-Connector device
  • jam-protected motor
  • particle filter
  • thermal insulation as standard equipment
Delivery contents:
  • pump
  • thermal insulation
  • Wilo-Connector
  • seals
  • installation and operating instructions
Technical data:
  • temperature of fluid to be pumped, drinking water up to 3.57 mmol/l (20 °dH): -2 °C...+70 °C, short-term operation (4 h) up to +75 °C
  • electrical connection 1~230 V, 50 Hz
  • protection class IPX4D
  • threaded connections Rp ½ and Rp 1
  • maximum operating pressure 10 bar
This product description is an automated translation of the original Finnish description.

Product details

Technical specifications

Product class (ETIM)Built-in circulation pump (EC010980)
Material pump casingStainless steel
Material quality pump casingCast steel 1.0625
Material impeller/pump wheelPolypropylene (PP)
Material quality impeller/pump wheelPP-GF
Volume flow rate (BEP)1.977 m³/h
Discharge head at flow rate (BEP)34.55 kPa
Max. discharge flow3.748 m³/h
Max. static height6.411 m
Max. operating pressure10 bar
Double pumpno
Number of phases1
Frequency50/60 Hz
Nominal current0.44 A
Motor power input (P1) per motor0.04 kW
Insulation class according to IECF

Product codes

SAPCZK538
HPAC4624090
PLC4624090
GTIN/EAN4062679266060
Manufacturer part number4255431
Vendor material number4255431

Basic information

Package measurements (L x W x H)194 x 213 x 121 mm
Package volume5 l
Package weight1.67 kg
Base uniteach
Package units1
Package contents
UNSPSC40101806
BrandWILO
VendorWILO FINLAND OY

Documents (1)