New

Roll over image to zoom in
PREWIRED CABLE-HF 20HF-UV SOLAR 2x6+6 C100 Dca
Product code
0408849
Wirell Anti-UV corrugated pipe, resistant to UV radiation and atmospheric conditions, suitable for outdoor installations and photovoltaic systems capable of withstanding direct sunlight. The pipe color is black, and it is a class 3442 750N pipe that can be installed in concrete, with operating and installation temperature range from -25 to +90. Tested in a climate chamber according to standards IEC 50289 and IEC EN 50618 using equipment meeting ISO 4892-2 requirements.
In direct sunlight, temperature inside the black pipe can rise up to +80 degrees, and the thermal load of Wirell Aalto UV pipes is designed for +90 to ensure long service life. Impact resistance class is 4, which is three times more impact-resistant than class 3 in freezing conditions. Solar conductors inside the pipe: H1Z2Z2-K Red and Black EN50618, IEC6230 TUV2PfG1169/10.16 tin-plated copper conductors, solar cables with triple certification and extremely high water resistance, and the cables are of very high quality.
A fine-strand grounding conductor H07Z1-K Dca MKEM is added to the pipe for grounding purposes. Solar cables have an expected service life of 25 years. Wirell 20HF/UV SOLAR KBE cables with 2 x 6+6 conductor configuration can also be installed underground following these guidelines:
1. When rising from the ground, the pipe must be mechanically protected with a cable guard to achieve class 4 (1250 N); even a split 25 mm UV-resistant conduit installed over a 20 mm pipe achieves class 4 strength of 1250 N.
2. Minimum burial depth for the pipe conduit is 30 cm, and installation conditions must be considered according to SFS 6000-8-814:2022. The solar pipe conduit must be additionally protected if required (rocky areas, roadways, burial depth).
3. The pipe end must be sealed with a cable termination to protect against rainwater.
4. The pipe conduit must be protected at both ends with short-circuit protection for both + and - conductors to ensure long-term and reliable operation; when properly installed, the cables are protected against cutting tools and maintain serviceability over a 25-year period.
The pipe complies with the following standards:
- IEC/EN 61386–1:2008 +A1
- IEC/EN 61386–22:2021+A1
- IEC 60754-2
- EN 61034-2 LSF0H
Product details
Technical specifications
Product class (ETIM)Plastic installation tube (pre-wired) (EC002904)
MaterialPolypropylene (PP)
Halogen freeyes
Fire retardant versionyes
Bending strengthPliable, self recovering
Compressive strength class according to EN 61386-1Medium (class 3, 750 N)
Impact strength class according to EN 61386-1Heavy (class 4 / 6 Joule)
Flush-mounted installationyes
Surface mountingyes
Suitable for installation on woodyes
Suitable for hollow wall installationyes
Suitable for concrete installationyes
Suitable for underfloor installation (screed)yes
Suitable for outdoor installationyes
Suitable for underground installationyes
Inner diameter14.5 mm
Product codes
SAPDLZ132
STK0408849
PLC0408849
GTIN/EAN6429810744043
Manufacturer part number0408849
Vendor material number0408849
Basic information
Package measurements (L x W x H)1000 x 0 x 0 mm
Package volume0.75 l
Package weight0.26 kg
Base unitMeter
Package units100 / 1600
Package contents–
UNSPSC26121536
BrandWIRELL
VendorWIRELL OY
The country of origin stated by the supplierFinland
Documents (4)
Brochures & documents
Links
Environment and safety
Carbon footprint data
Carbon footprint of product manufacturing (A1–A3 GWP value)0.6734
GWP, unitMeter
Source for GWP dataEPD
Documents (1)
Sustainability brochures & documents