ZAPTEC PRO CHARGER BLACK

ZAPTEC PRO is an AC-powered charging station designed for wall or pole mounting, built and manufactured in accordance with international electric vehicle charging system standards (IEC 61851-1) and supports charging via Mode 3. Requires the mounting plate CYZ675 for installation.

Fuse size

• Supports up to 63 ampere fuse (in series) in the charging station circuit

Mounting plate connection box

• Cable cross-section 2.5-10 mm²
• Cable diameter 10-20 mm²

Electrical network

• Supported distribution systems: TN, IT, and TT
• 230 V AC ±10%
• 400 V AC ±10%

Maximum current and charging power

• 7.36 kW* 32A single-phase charging
• 22 kW* 32A three-phase charging (only in TN system networks)
• Power consumption 5W in standby mode

Fuses

• Integrated 3 x 40A fuses (C-type)

Charging connector

• Standard: IEC 62196-2 Type 2 Female – additionally integrated automatic closing connector cover

Residual current device

• Integrated residual current device (B-type)
• Calibration and automatic testing of the residual current device before each charging session
• The residual current device can be reset automatically by disconnecting the charging cable from the connector

Theft protection

• The front cover of ZAPTEC PRO opens only with a special tool
• The charging cable can be locked to the charging station

Dynamic load balancing

• The ZAPTEC PRO charging system dynamically balances available power among connected charging stations using a dynamic load and phase balancing system

Dynamic phase balancing

• The ZAPTEC PRO charging system dynamically optimizes between single-phase and three-phase charging to maximize available power for the charging stations in the system

System network and cloud service connections

• 4G LTE-M1, Wi-Fi 2.4 GHz
• IEEE 802.11 b/g/n (channels 1-11)
• PLC module – HomePlug Green PHY
• 10 Mbit/s (optimized standard for smart grids, using 75% less power than conventional HomePlug standard)

Authentication and commissioning connections

• Bluetooth Low Energy (BLE 4.1)
• RFID/NFC reader (Mifare Classic, Type A)
• PLC module for future vehicle communication interface (Plug & Charge ISO15118 standard)

Standards and type approvals

• CE certification covering the following directives: Radio Equipment Directive 2014/53/EU, ROHS Directive 2011/65/EU, IEC 61851-1 (TUV SÜD), and IEC 61851-22

Operating temperatures

• Min. -30°C
• Max. +50°C

Protection

• IP54 rating
• Protected for indoor and outdoor use (e.g., water splashes)
• IK10 impact protection rating
• Protection against impact equivalent to a 5 kg object dropped from 40 cm height
• UL94 5VB flammability rating – flame self-extinguishes within 60 seconds if ignited
• UV protected
• Electrical protection
• Protection class II (additional insulation in addition to basic insulation)
• Type 3 surge protection

Integration standards

• Ability to use third-party services: API, Webhooks, OCPP 1.6J (cloud-to-cloud)