ZAPTEC PRO CHARGER BLACK 22kW 3-PHASE MID DISPLAY

ZAPTEC PRO is an AC-powered wall- or pole-mounted charging station designed and manufactured in accordance with international electric vehicle charging system standards (IEC 61851-1) and supports charging via Mode 3. It is a MID-certified display-equipped charging station. Requires the mounting plate CYZ675 for installation.

The ZAPTEC PRO charging system dynamically balances available power among connected charging stations using a dynamic load and phase balancing system. Built-in 3 x 40A (Type C) fuses.

Fuse size

• Supports up to 63 amperes fuse (in series) in the charging station circuit

Mounting plate connection box

• Cable cross-section 2.5-10 mm²
• Cable diameter 10-20 mm²

Electrical network

• Supported distribution systems: TN, IT, and TT
• 230 V AC ±10%
• 400 V AC ±10%

Maximum current and charging power

• 7.36 kW* 32 A single-phase charging
• 22 kW* 32 A three-phase charging (only in TN system networks)
• Power consumption 5 W in standby mode

Charging connector

• Standard: IEC 62196-2 Type 2 Female – additionally integrated self-closing connector cover

Residual current device

• Integrated residual current device (Type B)
• Calibration and automatic testing of the residual current device before each charging session. The residual current device can be reset automatically by unplugging the charging cable from the connector.
• Integrated electricity meter: MID-compliant (EN50470) meter built-in with display on the front panel.

Theft protection

• The front panel of ZAPTEC PRO opens only with a special tool. The charging cable can be locked to the charging station.

Dynamic phase balancing

• The ZAPTEC PRO charging system dynamically optimizes between single-phase and three-phase charging to maximize available power for connected charging stations.

System network and cloud service connections

• 4G LTE-M1
• Wi-Fi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
• PLC module – HomePlug Green PHY, 10 Mbit/s (standard optimized for smart grids, using 75% less power than traditional HomePlug standard)
• Authentication and commissioning connections
• Bluetooth Low Energy (BLE 4.1)
• RFID/NFC reader (Mifare Classic, Type A)
• PLC module for future vehicle communication interface (Plug & Charge ISO15118 standard)

Standards and type approvals

• CE certification covering the following directives: Radio Equipment Directive 2014/53/EU, ROHS Directive 2011/65/EU, IEC 61851-1 (TUV SÜD), and IEC 61851-22

Operating temperatures

• Minimum temperature -30°C
• Maximum temperature +50°C

Protection

• IP54 rating. Protected for indoor and outdoor use (e.g., water splashes)
• IK10 impact protection rating. Protects against impact equivalent to a 5 kg object dropped from 40 cm height
• UL94 5VB fire protection rating. Flame extinguishes within 60 seconds if the device ignites.
• UV protected
• Electrical protection
• Protection class II (additional insulation in addition to basic insulation)
• Type 3 surge protection

Integration standards

• Ability to use third-party services
• API, Webhooks
• OCPP 1.6J (cloud-to-cloud)