DIMMER WIRELESS FUD61NPN-230V WIRELESS

Wireless dimmer for mounting in a junction box. Maximum load 300W, no minimum load requirement. Suitable for dimmable 230V LED lamps and luminaires. Up to 35 different wireless buttons or remote controls can be paired with one universal dimmer. Buttons can be programmed either as directional buttons (on and dim up / off and dim down from opposite sides of the button) or as universal buttons (on/off and dim up/down from the same side of the button) (see user manual, quick guide, or tutorial video). The universal dimmer also has wired button inputs, allowing it to be controlled not only by wireless buttons but also by any conventional wired spring-return 230V universal or directional button. - Flush mounting, length 45 mm, width 45 mm, depth 33 mm. - Universal dimmer rated for up to 300W lamps and luminaires, depending on ventilation conditions. - Neutral connection with soft on/off to protect the load. - Supply, operating, and control voltage 230V. - No minimum load requirement. - Minimum light level or dimming speed adjustable. - Set light level is remembered when turned off (memory function). - In case of power interruption, the switch position is saved and restored when power is restored. - Automatic electronic overload and thermal protection. - In AUTO mode (trailing edge), dimming of all lamp types is possible, recommended! - Operating modes LC1, LC2, LC3 (leading edge), for 230V LED lamps that cannot be dimmed as desired in AUTO mode; additionally, the total number of dimmable 230V LED lamps may be lower than in AUTO mode depending on the electronic design. - LED indicator light flashes during programming according to the user manual and briefly flashes whenever it receives a wireless signal during operation. This product description is an automated translation of the original Finnish description.