MOTION DETECTOR DALI DL2-BH98S-PM

DALI-2 motion detector/light sensor, standard. Dimensions: 98x47mm. Installation depth: 30mm. Color: Matte polar white (equivalent to RAL9010). Optional: Recessed ceiling mounting box: GZD-BH98 (part no. 28 263 97). Surface mounting box: GAP-BH98-pm (part no. 28 263 98). DALI-2 certified. DL2-BH98 connects directly to the DALI bus and draws power from it. A DALI bus power supply is required; no separate additional power source is needed. Maximum power consumption: 3.5mA. Connection to DALI terminals can be made regardless of polarity. Terminals are suitable for conductors with a cross-section of 0.5mm² - 1.5mm². DALI cabling can be performed using standard low-voltage cables; no special cables are required. The mounting ring is installed directly into the recessed box. The box is then simply attached to the mounting ring. Sufficient internal space remains in the recessed box to enable a clean, low-profile installation. Easy alignment to the desired detection area, with 40° vertical tilt and 360° axial rotation. Application logic and instances configurable via DALI Cockpit. In principle, application logic and DALI-2 instances are separated. Application logic directs direct DALI control commands, which DALI drivers execute immediately. DALI-2 instances generate event messages, which higher-level control units interpret and further process. 4 operating modes: - Switching on detection of motion. - Switching on detection of motion with continuous lighting control. - Continuous light dimming. - Lighting control (4 threshold values). Operating modes can be changed via scenes and external DALI commands. Corridor function – a secondary light level for dimming before turn-off. Alternative use as an active DALI lighting control unit or sensor unit for integration into building management systems. Bidirectional integration via FD2G14 into the 14-series. Simple configuration via the DALI bus using the PC software tool DALI Cockpit. Multiple sensor modules can be installed in a DALI system. Automatic synchronization for multiple sensors with the same effective area. Motion detector: Detection range: 12m. Typical installation height: 8m. Zones: 92. Horizontal: ±51°. Vertical: ±46°. Light sensor: Range: 0-2047 lux (11 bit), resolution: 1 lux. Event: 0-2047 lux (10 bit), resolution: 2 lux. This product description is an automated translation of the original Finnish description.