PUSHRELAY FSR14-4X, WIRELESS

4-channel wireless relay for DIN rail. All four contacts of the relay can be controlled individually with their own wireless buttons, up to a maximum of 118 buttons per relay. In the same relay, impulse relay function (ESV) for on/off switching and working current relay function (ER) where the relay pulls in or releases as long as the button/sensor is held down. For wireless devices mounted on DIN rail, one FAM14 antenna module is always required, with additional required devices installed alongside it. The FAM14 receives wireless signals and forwards them via the RS485 bus. - 4-channel impulse relay with integrated relay function, 1 normally open (NO) contact per channel, 4A/250V AC - Resistive load capacity of 1000 watts - Potential-isolated from operating voltage - Equipped with DX technology - Standby power consumption of only 0.1 watt - Modular unit for DIN rail mounting compliant with DIN-EN 60715 TH35 standard - 1 module = width 18 mm, depth 58 mm - Connection to Eltako RS485 bus - Bus and power supply connected via jumpers - With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected to the neutral point at 230V AC 50Hz, significantly reducing their wear - If the supply voltage fails, the device switches off in the predefined state - Channels can be programmed as ESV and/or ER channels and controlled independently of each other This product description is an automated translation of the original Finnish description.