PUSHRELAY FSR61-230V WIRELESS

Wireless multifunction relay for mounting in a control panel, with multiple functions selectable in the same relay. ESV - Impulse relay for example for lighting on/off; if needed, a lower rotary switch can be used to set the off-delay between 2 and 120 minutes. ER - Working current relay; the relay pulls in/releases as long as the button is held down. Staircase lighting automation functions - Continuous light function (activated by a press of at least 1 second, continuous lighting turns off automatically after 2 hours or by pressing the button), off-warning (light begins to flash for approximately 30 seconds before the time ends), and combined continuous light function with off-warning. Up to 35 different wireless buttons, remote controls, or wireless door/window contacts can be programmed into a single relay. The relay also has a wired button input, allowing this wireless relay to be controlled not only by wireless buttons but also by any conventional wired spring-return 230V button or switch (see user manual, quick guide, or tutorial video).

• 1 normally open (NO) potential-free contact 10A/250V AC.
• 230V LED load up to 400W, incandescent lamp load up to 2000W.
• Standby power consumption only 0.8 watt.
• Recessed mounting, length 45mm, width 45mm, depth 33mm.
• Supply and control voltage 230V.
• Use of illuminated buttons is not permitted.
• The LED indicator light flashes during the programming process according to the user manual, and during operation it briefly flashes each time it receives a wireless signal.
• This product description is an automated translation of the original Finnish description.