PUSHRELAY FSR14-2X, WIRELESS

2-channel wireless impulse relay for DIN rail. Each contact of the relay can be controlled separately with its own wireless buttons, up to a maximum of 118 buttons per relay. In the same relay, the impulse relay function (ESV) enables on/off switching, and the working current relay function (ER) causes the relay to pull in or release as long as the button/sensor is held down. For wireless device installation on DIN rail, one FAM14 antenna module is always required, with additional required devices installed alongside it. The FAM14 receives wireless signals and forwards them via the RS485 bus. - 2-channel impulse relay with integrated relay function, 1 + 1 normally open (NO) potential-free contacts rated at 16A/250V AC - Resistive load capacity of 2000 watts - Equipped with DX technology - Standby power consumption of only 0.1 watt - Modular unit for DIN rail mounting compliant with DIN-EN 60715 TH35 standard - 1 DIN module = width 18 mm, depth 58 mm - Connection to Eltako RS485 bus - Bus and power supply connected via jumpers - With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected to the neutral point at 230 V AC 50 Hz, significantly reducing their wear - Channels can be programmed as ESV and/or ER channels and controlled independently of each other This product description is an automated translation of the original Finnish description.