Roll over image to zoom in
TRANSMITTER MODULE FSM14-UC WIRELESS
Wireless 4-channel transmitter unit. With interchangeable antenna. Optionally, a wireless antenna FA250 (28 140 15) or FAG55E (28 263 68 & 28 263 69) can be connected. Standby power consumption is only 0.1 watt.
Used together with the antenna module FAM14 (28 140 22), or alternatively as a standalone device with the power supply FSNT14-12V/12W (28 141 81), by connecting to the 12V DC terminals +12V/GND.
The transmitter unit FSM14-UC has four channels and can transmit wireless button-like control signals from any wired electrical devices to Eltako's wireless system. A wireless signal is always transmitted whenever control voltage is applied to any channel of the transmitter unit.
Can be used, for example, to wirelessly transmit signals from wired buttons, motion detectors, dimmer switches, or other wired electrical devices. The transmitter unit is connected to Eltako's wireless relay receivers.
- Modular unit designed for DIN-rail mounting according to standard DIN-EN 60715 TH35.
- 1 module = width 18mm, depth 58mm.
- Control inputs accept control commands with a general control voltage of 8-253V AC or 10-230V DC and a duration of at least 0.2 seconds. Maximum parallel capacitance of the control wire (approximately length) is 0.09?F at 230 volts. This corresponds to approximately 3000 meters.
- If terminals E1 and E2 are connected together, a wireless message is transmitted from E2 as long as control voltage is applied, for example for central control commands with priority.
- A rotary switch is used to activate or deactivate encryption, and in operation it must be set to AUTO.