DIMMER WIRELESS FUD61NP-230V WIRELESS

Wireless dimmer without N-conductor, for mounting in a junction box. For R-, L-, and C-loads, up to 300W. Minimum load only 40W. Not suitable for use with 230V LED and energy-saving lamps; use a dimmer with N-connection for these: FUD61NPN (No. 28 140 09). - Flush mounting, length 45mm, width 45mm, depth 33mm. - Universal dimmer for R-, L-, and C-loads, up to 300W, depending on ventilation conditions. - Automatic detection of load type R+L or R+C. - No N-conductor required; suitable for direct mounting behind a spring-return push button, even if no N-conductor is present. - Supply, operating, and control voltage 230V. - Minimum load only 40W. - Neutral connection with soft on/off to protect the load. - Set light level is remembered when turned off (memory function). - Automatic electronic overload and thermal protection. - Minimum light level can be adjusted with the upper rotary switch. - In LRN mode, the upper rotary switch allows programming of up to 35 wireless buttons to one dimmer, where one or more may also be central control buttons. - Dimming speed can be adjusted with the lower (dim-speed) rotary switch, which also changes the soft on/off timing. This product description is an automated translation of the original Finnish description.