WIRELESS DALI GATEWAY FDG62-230V

Wireless DALI interface. Also requires power supply DL-N2-80mA (No. 26 169 15). Up to 32 different wireless push buttons can be programmed to one FDG62 interface: on/off buttons (from the same side), direction buttons (from opposite sides), central control button, motion sensor, tunable white and two-level intensity buttons, using a simple tapping technique. • Flush mounting. • Dimensions: length 49mm, width 51mm, depth 20mm. • Terminal connections for conductor cross-sections of 0.2mm² - 2.5mm². • Bidirectional wireless functionality can be enabled. • Power supply: 230V at terminals N and L. • DALI power supply DL-N2-80mA and up to 40 DALI devices are connected to the DALI terminals. • The FDG62 interface controls DALI devices via wireless EnOcean transmitters, buttons, and sensors. • Only broadcast commands can be sent. • In addition to wireless radio frequency control via the internal antenna, connected DALI devices can also be controlled by a conventional wired spring-return 230V push button mounted in front of the FDG62. • Use of illuminated push buttons is not permitted. • The FDG62 internally stores the dimming value and reports it as a feedback signal. • The same feedback signals are generated as for device FD62NPN. • Devices can then be activated using feedback signals. • The FDG62 operates as a DALI master. This product description is an automated translation of the original Finnish description.