DIMMER ROTARY INTRO ROTARY 3-400W, WHITE

Rotary knob with a white central plate and knob. Designed for switching and dimming lights.

Features

• recess depth 24 mm
• automatically detects lamp load and selects appropriate dimming method
• operates either in leading-edge or trailing-edge dimming mode
• manual selection of dimming mode also possible
• operates without N-wire with 230 V LEDs and compact fluorescent lamps (other lamp types require a minimum load of 50 W to operate without N-wire)
• soft start
• turns on to last brightness level or stored brightness level; brightness level upon turn-on can be stored
• electronic short-circuit protection with permanent disconnection after at most 7 seconds
• electronic overheating protection
• load can be increased with an external power supply
• controller can be paralleled controlled with a side controller or push button
• screw terminals
• maximum supply cable length 100 m
• standby consumption approx. 0.35 W
• losses approx. 4 W
• ambient temperature -5 ... +45°C

Permitted loads (25°C):

• dimmable LEDs (230 V) 3...100 W, trailing-edge setting max. 400 W
• incandescent lamps 20...420 W
• halogen lamps (230 V) 20...420 W
• electronic transformers 20...420 W
• electronic transformers for low-voltage LEDs typically 20...100 W, trailing-edge setting max. 200 W
• inductive transformers 20...420 VA
• inductive transformers for low-voltage LEDs typically 20...100 VA
• dimmable fluorescent lamps typically 3...100 W

This product description is an automated translation of the original Finnish description.