CONTROL UNIT KNX 230VAC F. APPL.MODULES

Power supply housing with square mounting ring suitable for S.1, Q.x, K.x and R.1/R.3 mounting system components with RF functionality for quicklink radio control. The power supply is used to provide mains power to the control unit when the radio unit is to be used purely as a transmitter for controlling another quicklink radio product acting as a receiver.

Operating voltage 230 VAC
Frequency 50/60 Hz
Operating temperature -5 ... +45 °C
Mounting depth 22 mm
Mounting depth 32 mm (clips)
Screw terminals (max.) 1 x 4/2 x 2.5 mm²
Comprehensive transmitting and receiving functions, in conjunction with the KNX radio application module.

quicklink motion sensor application modules can be used with the power supply housing only as an extension unit (slave). For this purpose, the quicklink motion sensor application module must be installed with the relay housing as the main unit (controller) type: 8512 12 00.

- Naturally low energy consumption
- No conductive connection between the mounting ring and the mounting clips
- Marked
- Power supply for radio application modules This product description is an automated translation of the original Finnish description.