ROUTER KNX TYFS121 IP/KNX SECURE 1M DIN

The IP/KNX router is a module device that can be installed in distribution boards. It uses the KNXnet/IP standard to create a data transmission connection between KNX lines and a local network using the IP protocol.

Routing function (KNXnet/IP routing): The IP router connects two separate KNX bus lines to the data network while galvanically isolating them. This enables the lines to be used as independent bus lines. The router can be used as a line coupler or area coupler in existing KNX networks as well as in new KNX networks.

TYFS121 includes a filter table configuration to determine which messages are allowed to cross the interface to or from the line, reducing bus load. ETS automatically generates the filter table during configuration and system startup. Additionally, manual mode allows temporary disabling of filtering to permit message transmission, facilitating certain tests performed during commissioning.

Interface functions with the bus (KNXnet/IP tunneling): The IP router also includes an interface function. It is used to establish a bus connection from any location on the network, locally or remotely via a LAN modem.

This product description is an automated translation of the original Finnish description.