OCCUPANCY/MOTION DETECTOR KNX TXD503 360D D20M FM WHITE

Motion and presence sensor for automatic on/off control and constant light level adjustment of lighting in various room types based on light level and movement. Master-slave operation enabled via programming object between sensors connected to the bus.

Operating mode can be activated using a dedicated remote control or via ETS software. Detection diameter is approximately 20 m for motion detection and approximately 10 m for presence detection in the central area at an installation height of 2.5 m with a 360° detection angle. The detection area can be restricted using masking stickers supplied with the sensor. The lighting off delay can be set between 5 s and 60 min.

Installation into ceiling surface as recessed mounting with a mounting hole diameter of 68 mm. The sensor is equipped with a KNX bus interface for integration into a KNX building automation system.

This product description is an automated translation of the original Finnish description.