MOTION DETECTOR KNX TXD505 360D 5X30M FM WHITE

The motion sensor enables automatic on/off control and fixed light level adjustment of longitudinal corridor and entrance areas based on light level and movement. Master-slave operation is possible via programming object between sensors connected to the bus.

The operating mode can be activated using a dedicated remote control or via the ETS software. The detection area at installation height of 3 m is approximately 30 x 5 m for transverse movement and approximately 14 x 5 m for movement directed toward the sensor. The detection area can be limited using masking tapes supplied with the sensor. The light shutoff delay is adjustable between 5 s and 60 min.

Installation is into the ceiling surface, recessed, with a mounting hole diameter of 68 mm. The sensor is equipped with a KNX bus interface for integration into a KNX building automation system.

This product description is an automated translation of the original Finnish description.