DISTRIBUTION BOX NAF COMM. SPLICE BOX 48/96-K

The enclosure is a so-called splice continuation consisting of a lower section with splice plates and a protective cover. Designed for splicing 48 or 96 fibers. The enclosure can be used in cable side entries. Dimensions including cable entries: 489 x 235 x 94 mm. The lower section's flange has two oval entries. Material: stainless steel. Below the splice plate are adhesive plastic supports for uninterrupted fiber tubes. Seal rating: IP 68. Designed and manufactured in Finland.

In addition to standard accessories, the basic package includes mechanical cable entries 4x15mm and 6x10mm, as well as alternative cable glands with branching units, and 100 pieces of 40mm long fiber splice protectors.

Other suitable glandless cable entries: S.no: 7263240, 7263241, 7263242, 7263243

Microtubes can be easily introduced into the general continuation due to the mechanical cable entries. Microtubes can be introduced into the enclosure as follows:

• Tube size 14/10 mm; 4 tubes per entry, with 4 breakable holes for tubes or cables up to 15 mm. Holes are drilled in the main tube with a 12 mm drill bit.
• Tube size 7/3.5 mm; 6 tubes per entry, with 6 breakable holes for tubes or cables up to 10 mm. Holes are drilled in the drop tube with a 5 mm drill bit.
• Entries with 2 holes of 15 mm and 3 holes of 10 mm can also be used. Thus, from one such entry, two main tubes and three drop tubes can be introduced. The maximum number of microtubes in the enclosure is therefore: - 4 main tubes and 6 drop tubes or - 2 main tubes and 9 drop tubes.

This product description is an automated translation of the original Finnish description.