AUTOMATION CABLE KNX J-H(ST)H 2x2x0,8 FRNC GN R100

The KNX system typically extends to all parts of a building and must operate with absolute reliability. Therefore, it is entirely irrelevant which cable is used for the installation. By using certified bus cable, the highest technical quality is achieved and time-consuming troubleshooting of installation errors is avoided. The conductor colors of the certified KNX cable comply with the KNX standard and match the markings on the products. The green-sheathed KNX cable is easily distinguishable from other low-voltage cables. Only by using certified cable can one be certain that the KNX system achieves the maximum installation distances specified in the standard (total line length up to 1000 m, maximum distance from power supply up to 350 m). Schneider Electric supplies certified KNX cable J-H(ST)H 2x2x0.8 FRNC. Available in reels of 100 m (electrical number 02 707 00) and 1000 m (electrical number 02 707 20). The cable is halogen-free and flame-retardant according to IEC60332-1-2 standard. When installed outdoors, the cable must be protected from UV radiation, and when buried underground, a protective conduit must be used. Fire performance according to EN50575/EN50399: - Class DCA - Smoke production s2 - Burning droplets d2 - Acidity a1 This product description is an automated translation of the original Finnish description.