CONTROL UNIT KNX LOGIC MODULE BASIC REG-K

The logic unit contains 10 logic blocks, 10 filter/timer blocks, 8 converter blocks, and 12 multiplexer blocks, as well as 3 programmable buttons and 3 LED indicators.
Programmable KNX functionality:
10 logic blocks (AND, OR, XOR)
- 8 binary inputs and 1 binary output per block.
- Inversion of inputs/output.
- Output gating (gate function).
- Input behavior after power interruptions.
10 filter/timer blocks
- Binary input and output objects with time delay.
- Binary input filtering.
- Output gating (gate function).
- Input behavior after power interruptions.
8 converter blocks
- 1 bit -> 2 bit (priority)
- 1 bit -> 1 byte
- 1 byte -> 1 bit
- Output gating (gate function).
- Input behavior after power interruptions.
12 multiplexer blocks
Multiplexer blocks are used for selecting messages, for example, when lighting needs to be controlled individually or in groups depending on usage scenarios in partitioned conference rooms.
- Supported messages: 1 bit, 2 bit, 4 bit, 1 byte, 2 byte.
- Message transmission or blocking in one or both directions controlled by a control object.
- Output gating (gate function).
- Adjustable output delay.
Programmable buttons and LED indicators
- Can be freely linked to binary objects.
Behavior after power interruption
- Configurable startup delay after reapplication of bus voltage
Device width: 2.5 modules = approximately 45 mm This product description is an automated translation of the original Finnish description.