CABLE CABINET E-MOBILITY AHMA LK12308VX

Charging stations are wall-mounted electrical units designed to meet the requirements and specifications of charging station standards. Temperature management is particularly critical in electric vehicle charging, so UTU charging stations always feature component-specific ventilation gaps and field-specific ventilation. The enclosure rating is IP31 due to the ventilated structure, which can be upgraded to IP34 by installing a protective cabinet (suitable protective cabinet LKS890, part no. 3426356). Charging Station Ahma LK12308VX Features

• Rated current 125A (selectable 80A / 100A / 125A)
• Outputs: 8 units of ADM482C (Hager residual current device, C-curve 32A, 4-pole, 30mA)
• Input: Compact circuit breaker HHS125DC with mounting rail (Hager H3+)
• Network analyzer with ModBus communication interface (Circutor CVM-C11)
• Input connectors HYS005H (Al/Cu 35-120mm˛)
• Charging output connectors: Al/Cu terminal connectors 2.5-35mm˛

Temperature Management

In electric vehicle charging, the output components of the station often operate near their rated current, making temperature management critically important for the station’s service life.

The station incorporates temperature management features tailored to charging load demands:

• Field-specific ventilation
• Air gaps at charging outputs
• Thermal emergency shutdown function

Charging output balancing factor is 1 (as required by the charging station standard).

The station includes DIN-rail mounting for sensors enabling readiness for dynamic temperature management. When connected to an eParking backend system, the charging station can dynamically control charging load based on the temperature of output components.

Service Life Management

The station includes reserved space for load management devices. Load management space is a general device compartment suitable for installing any device. Reserved space is provided for the eTolppa system load management device (eG) to enable multi-level load management. When the eTolppa system load management device is installed in the station, no separate connection device is required at charging stations.

If the thermal emergency shutdown function repeatedly interrupts power supply during the station’s service life, it is advisable to implement dynamic temperature management. In this mode, the backend system can continuously limit charging station loads based on the temperature of output components.

The station includes reserved space for a harmonic filter. The network analyzer can monitor the development of harmonic distortions, and a harmonic filter can be easily added later. Alarms related to harmonics can be configured on the analyzer.

The station also includes a separate compartment for spare outputs. The spare output compartment comes standard with 3 units of C10 and 2 units of C16 (1-pole) circuit breakers (for additional electrical needs). Spare outputs are not pre-wired to busbars.

This product description is an automated translation of the original Finnish description.