CABLE CABINET E-MOBILITY AHMA LK12308X

Charging stations are wall-mounted electrical units designed to meet the requirements and specifications of charging station standards. Temperature management is particularly critical in electric vehicle charging, so UTU charging stations always feature component-specific ventilation gaps and field-specific ventilation. The enclosure class is IP31 due to the ventilated structure, which can be upgraded to IP34 by installing a protective cabinet (suitable protective cabinet LKS890, order no. 3426356). Charging Station Ahma LK12308X features:

• Nominal current 125A (selectable 80A / 100A / 125A)
• Outputs: 8x MCN332E (Hager circuit breaker, C-curve, 32A, 3-pole)
• Supply: Compact circuit breaker HHS125DC with mounting rail (Hager H3+)
• Network analyzer with ModBus communication interface (Circutor CVM-C11)
• Supply connectors HYS005H (Al/Cu 35-120mm˛)
• Charging outputs: Al/Cu terminal connectors 2.5-35mm˛

Temperature management

In electric vehicle charging, the output components of the station often operate near their nominal current, making temperature management critically important for the station’s service life.

The station incorporates temperature management requirements according to charging load:

• Field-specific ventilation
• Air gaps in charging outputs
• Thermal emergency shutdown function

Charging output balancing factor 1 (as required by the charging station standard).

The station features DIN rail mounting for sensors, enabling readiness for dynamic temperature management. When connected to an eParking backend system, the charging station can dynamically control charging load based on the temperature of output components.

Service life management

The station includes reserved space for load management devices. Load management space is a general device compartment suitable for installing any device. Reserved space is allocated for the eTolppa system load management device (eG) for multi-level load management. When the eTolppa system load management device is installed in the station, no separate connection device is required at charging stations.

If the thermal emergency shutdown function repeatedly interrupts power supply during the station’s service life, it is advisable to implement dynamic temperature management. In this mode, the backend system can continuously limit charging station loads based on the temperature of output components.

The station includes reserved space for a harmonic filter. The network analyzer can monitor the development of harmonic distortions, and a harmonic filter can be easily added to the station afterward. Alarms related to this can be added to the analyzer.

The station also includes a separate compartment for spare outputs. The spare output compartment is standardly equipped with 3x C10 and 2x C16 (1-pole) circuit breakers (for additional electrical needs). Spare outputs are not wired to busbars.

This product description is an automated translation of the original Finnish description.